| Customization: | Available |
|---|---|
| Certification: | ISO9001, CE |
| Salt Rejection Rate: | 99.5% |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The Working Principle of RO Water Treatment System
A container is divided into two halves, the middle of the container will have a semi-permeable membrane barrier, the container on both sides of the weak solution and concentrated solution, due to the principle of pressure difference, the solution of low concentration will flow to the high concentration.
Flow chart of Ro Water Treatment System
Source water tank → source water booster pump → multi-media filter → activated carbon filter → cation resin softener → precision filter → primary RO reverse osmosis pure water system → secondary RO reverse osmosis pure water system → water gas mixer →Ozone sterilizer→Stainless steel pure water tank→Automatic filling line
|
Model |
JFRO-1000L |
|
Host Size |
1000x600x1600mm (can be customized) |
|
Power |
2.2KW |
|
Power Supply |
220V /380V/460V - 50Hz/60Hz,220V 50Hz can be customized |
|
Operating Pressure |
0.8-1.2MPa |
|
Recovery Rate |
50% |
|
Designed Water Inlet |
2000L/h |
|
Outlet Flow |
1000L/h |
|
Desalination Rate |
≥99.5% |
|
RO Frame |
SUS304 |
|
Membrane Size |
4040 |
|
Membrane Elements |
DOW /Hydranautics/Troy/ Vontron (Optional) |
|
Number of Membranes |
4 |
|
Raw Water Pump |
CNP/NYP |
|
High Pressure Pump |
CNP/NYP |
|
Tank Material |
SS/FRP(Optional) |
|
Control Valve |
Manual/Automatic |
|
Control Valve Brand |
FLECK/RUNXIN |
|
Membrane Housing |
SS/FRP |
|
Pipe Material |
U-PVC/ Stainless steel (Optional) |
RO Water Treatment System Introduction:
The desalination rate of reverse osmosis equipment is high, and the desalination rate of single membrane can reach 99%. Reverse osmosis water treatment system runs stably, desalting rate and recovery rate are high. Simple operation, small maintenance workload, compact structure, saving installation space. High efficiency and low energy consumption, no secondary pollution, low operating cost, the application of membrane separation technology, removal of charged ions, inorganic matter, colloidal particles, bacteria and organic matter in water.
Components and Principles of RO Water Treatment System
The reverse osmosis system includes high pressure pump, reverse osmosis membrane element, pressure vessel (membrane shell), cleaning system and control instrument; the principle of reverse osmosis water treatment system is: when a pressure greater than osmotic pressure is applied on the brine side of the membrane, the water The direction of flow will be reversed, and the water in the brine will flow into the fresh water side, a phenomenon called reverse osmosis.
Application of RO Water Treatment System
Reverse osmosis technology is usually used in seawater, brackish water fresh water; Water softening treatment; Waste water treatment and food, pharmaceutical industry, chemical industry purification, concentration, separation and other aspects. In addition, the application of reverse osmosis technology in pre-desalting treatment also achieved good results, can make the ion exchange resin load reduction more than 90%, resin regenerating agent dosage can also be reduced by 90%. Therefore, it is not only cost saving, but also beneficial to environmental protection. Reverse osmosis technology can also be used to remove particles, organic substances, colloids in water, to reduce the pollution of ion exchange resin, prolong the service life has a good role.
){kind=link}