| Customization: | Available |
|---|---|
| Certification: | ISO9001, CE |
| Salt Rejection Rate: | 99.5% |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
10TPH Ro Water Treatment Plant Reverse Osmosis System Purification Machine
Product Introduction of RO Water Treatment System
1. Achieve deep filtration of water by increasing the pressure on water. In addition to general filters, reverse osmosis pure water equipment also has fine filters, granular activated carbon filters and compressed activated carbon filters. The fine filter has a finer filtering function than the general filter, and can better filter impurities in the water. As we know, activated carbon has a good adsorption and filtration function for odors and impurities. The reverse osmosis pure water equipment uses double activated carbon filters to realize the deep filtration of raw water and improve the filtration efficiency of the equipment. At the same time, it is also an innovation to enhance the filtration capacity by increasing the pressure of the water.
2. The core of reverse osmosis pure water equipment is the application of reverse osmosis membrane. The reverse osmosis membrane is a filter membrane with extremely small pore size. Using this membrane can realize ultra-fine filtration of raw water, and can divide water into high concentration and low concentration at the same time. Water with a higher concentration can be recycled and reused, and water with a lower concentration is pure water that can be used by humans.
The Basic Working Principle of RO Water Treatment System
After a special high-pressure pump, when the raw water is added to a pressure of 6-20 kg, the raw water permeates through the reverse osmosis membrane with a pore size of only 0.0001 microns under the action of pressure. Chemical ions, bacteria, fungi, and virions cannot pass through, and are discharged with wastewater. Only water molecules and solvents with a volume of less than 0.0001 microns are allowed to pass through.
Product Display of 10TPH RO Water Treatment System
Technical Parameters
| 10m³/h Reverse Osmosis System | |
| Model | JFRO-10T |
| Host Size | 3000x1000x1700mm (can be customized) |
| Power | 11KW |
| Power Supply | 220V /380V/460V - 50Hz/60Hz,220V 50Hz can be customized |
| Operating Pressure | 1.2~1.5MPa |
| Recovery Rate | 70% |
| Designed Water Inlet | 14t/h |
| Outlet Flow | 10t/h |
| Desalination Rate | ≥99.5% |
| RO Frame | SUS304 |
| Membrane Size | 8040 |
| Membrane Elements | Vontron (Optional) |
| Number of Membranes | 2 |
| Raw Water Pump | CNP |
| High Pressure Pump | CNP |
| Tank Material | SS/FRP(Optional) |
| Control Valve | Manual/Automatic |
| Control Valve Brand | RUNXIN |
| Membrane Housing | FRP |
| Number of Membrane housing | 5 |
| Pipe Material | U-PVC/ Stainless steel (Optional) |
Advantages of RO Water Treatment System
Reverse osmosis equipment belongs to physical desalting method, which has many advantages.
1) Non-phase-change physical method was used to desalinate and purify the saline water under norma temperature.
2) Desalting rate of single membrane element is 99.3% and can remove colloid, organics, bacteria, virus and all kinds of heavy metals in water at the same time.
3) With water pressure as the driving force, energy consumption is the lowest among many treatment methods.
4) No need for large amount of chemical treatment, no elimination of chemical waste liquid, no environmental pollution, and the recovery rate is over 70%.
5) High automation program, automatic stop in case of ailure, with automatic protection function.
6) The system is simple, easy to operate, and the water quality is stable.
7) Equipment covers small area, compact structure, reliable operation and high water quality.
Process flow of RO Water Treatment System
Raw water → Raw water tank → Raw water pump → Multi-media filter (quartz sand filter) → Activated carbon filter → Soft water processor → Precision filter → High pressure pump → Primary reverse osmosis (RO) device → Purified water tank → High pressure pump → Two Stage reverse osmosis → ultraviolet sterilization device → water point.
Reverse Osmosis Project Case Display
Packaging and Logistics
Company Exhibition
JUFU's Five Guarantees
JUFU's Business Partner
FAQ:
1. What is the design water yield of ro membrane element? (except anti-pollution membrane and seawater desalination membrane)
Model 4040 is designed by 0.25m3/h
Model 8040 is designed by 1-1.2m3/h
2. What is the material of mechanical filter?
Carbon steel, stainless steel, fiberglass
3.What are the multi-way control valves?
Manual control valve, automatic control valve
Multi - way control valve is divided into: filter valve and softening valve
Automatic control valve is divided into: time type and flow type.
Multi-way control valve brands are: FLECK, AUTOTROL, Runxin, clean source, etc.
){kind=link}