Double Stage Reverse Osmosis Pure Water System 1tph Water Treatment Plant

• Certification: ISO9001, CE
• Salt Rejection Rate: 99.5%
• Application: Industry
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: JFRO-1000L
• Capacity: 1000L Per Hour
• RO Frame: SUS304/Carbon Steel (Optional)
• Warranty: 12 Months Warranty and Lifetime Service
• Power: 110kw
• Function: Water Purification
• Operating Pressure: 1.2-1.5MPa
• Membrane Size: 8040
• NBR of Membrane: 108
• NBR of Membrane Housing: 18
• Desalination Rate: 99.5%
• Recovery Rate: 50%
• Type: Reverse Osmosis
• Product Name: RO Water Treatment System
• Voltage: 110V/220V/380V Can Be Customized
• Materials: FRP, Stainless Steel, UPVC
• Transport Package: Wooden Packing
• Specification: 6m3
• Trademark: Jufu
• Origin: China
• HS Code: 8421219990
• Production Capacity: 2000pieces/Year
• Package Size: 150.00cm * 95.00cm * 220.00cm
• Package Gross Weight: 700.000kg

Product Description

 Double Stage Reverse Osmosis Pure Water System 1tph Water Treatment Plant
 

Basic Principle of RO Water Treatment System

 

The same volume of dilute solution (e.g., water) and thick liquid (such as sea water or salt water), respectively, on both sides of the container, separated by a semipermeable membrane, dilute solution of the solvent nature through a semipermeable membrane, flowing the concentrated solution side, the side of the strong solution liquid level than the dilute solution of liquid level above a certain height, and form a pressure difference, achieve osmotic balance state, this pressure difference is the osmotic pressure, The osmotic pressure depends on the type, concentration and temperature of the concentrated solution, and is independent of the properties of the semi-permeable membrane. If a pressure greater than osmotic pressure is applied on the side of the concentrated solution, the solvent in the concentrated solution will flow to the dilute solution, and the flow direction of the solvent is opposite to the direction of the original infiltration. This process is called reverse osmosis.

 

Flow chart of Ro Water Treatment System

 

Source water tank → source water booster pump → multi-media filter → activated carbon filter → cation resin softener → precision filter → primary RO reverse osmosis pure water system → secondary RO reverse osmosis pure water system → water gas mixer →Ozone sterilizer→Stainless steel pure water tank→Automatic filling line
 

Technical details of RO Water Treatment System
 

Model	JFRO-1000L
Host Size	1000x600x1600mm (can be customized)
Power	2.2KW
Power Supply	220V /380V/460V - 50Hz/60Hz,220V 50Hz can be customized
Operating Pressure	0.8-1.2MPa
Recovery Rate	50%
Designed Water Inlet	2000L/h
Outlet Flow	1000L/h
Desalination Rate	≥99.5%
RO Frame	SUS304
Membrane Size	4040
Membrane Elements	DOW /Hydranautics/Troy/ Vontron (Optional)
Number of Membranes	4
Raw Water Pump	CNP/NYP/ (Optional)
High Pressure Pump	CNP/NYP/ (Optional)
Tank Material	SS/FRP(Optional)
Control Valve	Manual/Automatic
Control Valve Brand	FLECK/RUNXIN
Membrane Housing	SS/FRP
Pipe Material	U-PVC/ Stainless steel (Optional)

 

Reverse osmosis water treatment system generally includes pretreatment system, reverse osmosis device, post-treatment system, cleaning system and electrical control system:

 

1, the pretreatment system generally includes the original water pump, dosing device, quartz sand filter, activated carbon filter, precision filter, etc. Its main function is to reduce the pollution index of raw water and other impurities such as residual chlorine to meet the requirements of reverse osmosis inlet water.

2. Reverse osmosis device mainly consists of multistage high pressure pump, reverse osmosis membrane element, membrane shell (pressure vessel), bracket and so on. Its main function is to remove impurities in water, so that the water meets the requirements of use.

3. Post-treatment system is an additional configuration in the case that reverse osmosis cannot meet the requirements of outlet water. Mainly including negative bed, positive bed, mixed bed, sterilization, ultrafiltration and other one or more of the equipment.

4, cleaning system is mainly composed of cleaning water tank, cleaning water pump, precision filter. When the reverse osmosis system is polluted and the effluent index cannot meet the requirements, it is necessary to clean the reverse osmosis system to restore its efficacy.

5. Electrical control system is used to control the normal operation of the whole reverse osmosis system. Including instrument panel, control panel, all kinds of electrical protection, electrical control cabinet, etc.

 

The pretreatment of the reverse osmosis water treatment system can ensure the stable operation and service life of the reverse osmosis device, such as the following:

 

(1) To prevent scaling on the film surface (including CaCo3, CaSO4, SrSO4, CaF2, SiO2, iron and aluminum oxide, etc.);

(2) to prevent colloidal substances and suspended solid particles fouling;

(3) to prevent pollution and blockage of organic matter;

(4) to prevent microbial fouling;

(5) to prevent oxidative damage to the film by oxidizing substances;

(6) Keep the water yield of reverse osmosis device stable.

 

Pretreatment system: iron and manganese filter, multi-media filter, activated carbon filter, sodium ion exchanger, precision filter, ultrafiltration.