| Certification: | ISO9001, CE |
|---|---|
| Salt Rejection Rate: | 99.5% |
| Application: | Industry |
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier Process Characteristics of EDI Water Treatment Plant
EDI,Electro-deionization uses mixed ion exchange resin to absorb anion and cation in water, at the same time, the asorption of ions and under the action of dc voltage, respectively through ion exchange membrane into drain water and elcetrical water so as to be removed, on the other hand, under the action of dc voltage, water can produce enough dissociated H + ions and OH - ions, in order to realize continuous deep desalting.This new technology can replace the traditional ion exchange (DI),The system can produce pure water with resistance rate as high as 18 m Ω .EDI's most significant advantage is that it eliminates the need for acids and alkaline which are used in the generation of ion-exchange resins making it more environmentally friendly.
EDI, also called electric desalination is a new ultra pure water technology which gradually developed in the 20th century, which combines electric dialysis technology and ions exchange technology. It is using the selectivity penerate function of anion and cation membrane and exchange function of ions exchange resin, under direct current electric field to make ion directed migration. Finally to make deep desalination of water. In the same time, hydrogen ion and hydroxide ion which produced when water ionized will regeneration, and it can produce ultra pure water continuously.
|
EDI System |
|
|
Model |
JFEDI-4T |
|
Host Size |
can be customized |
|
Operating Pressure |
0.1-0.3MPa |
|
Recovery Rate |
95% |
|
Rack Material |
SUS304/Carbon Steel (Optional) |
|
Pipe Material |
U-PVC/ C-PVC/Stainless steel (Optional) |
|
EDI Brand |
Ionpure/Canpure/GE (Optional) |
|
Raw Water Pump |
CNP/NYP (Optional) |
|
Tank Material |
SS/FRP(Optional) |
|
Outlet Flow |
3t/h |
|
Power Supply |
220V /380V/460V - 50Hz/60Hz,220V 50Hz can be customized |
Process characteristics
EDI process using an ion selective membrane and ion exchange resin under dc voltage is sandwiched between two electrodes, between between the poles of dc electric field from the RO water processed by the removal of ions, EDI process system instead of the traditional hybrid resin bed to make deionized water, with ion exchange mixed bed big difference is that EDI can continuous to ion process, High degree of automation, and does not need acid and alkali regeneration.
Workflow Chart of EDI Water Treatment Plant
Precautions for use and cleaning of EDI equipment
Matters needing attention when EDI device is running
1. Must meet the water inlet conditions.
2. Fresh water inlet pressure > concentrated water inlet pressure 10PSI≈0.07MPa.
3. Product water outlet pressure ≥ Concentrate water discharge pressure 10PSI ≈ 0.07MPa.
4. When the EDI rectification equipment is out of service, RO (or water of the same water quality) must not pass through the equipment.
5. Reduce frequent downtime of equipment.
Equipment outage for a long time
1. If the EDI system is out of service for more than 3 days, it should be protected for a long time out of service to avoid the growth of microorganisms inside the EDI.
2. Cut off all power switches in the PLC control cabinet.
3. Allow the remaining water in the EDI piping system to drain to avoid stagnant water in between.
4. Close all system valves.
5. After restarting after a long period of shutdown, the membrane block may need to be disinfected, cleaned or regenerated.
Advantages of EDI compared with traditional mixed bed:
The advantages of continuous desalting by electrodialysis and deep desalting by ion exchange are retained;
Compared with ordinary ion exchange resin column, the amount of ion exchange resin is less, saving more than 95% of resin;
Ion exchange resin does not need acid and alkali chemical regeneration, saving a lot of acid and alkali and cleaning water, greatly reducing labor intensity;
No waste acid waste lye discharge, is clean production technology, green environmental protection products;
The process is easy to realize automatic control, EDI and reverse osmosis (RO), UF and other water treatment technology combined, can form a perfect high pure water production line;
Small footprint, and do not need to be like ion-exchange beds, a set of in-use, a set of regeneration of the repeated Settings.
Application of EDI Water Treatment Plant
Electronic chip high pure water;
Power high pressure boiler supply water;
Chemical, metallurgy, electroplating and other industries pure water, high pure water;
Biotechnology, pharmaceutical industry, medical devices, experimental technology ---- pure water, high pure water.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}