RO System Mixed Bed Machine Water Reverse Osmosis Treatment Plant

Product Description

Water Mixed Bed RO System Water Rever Osmosis Treatment Plant

Definition of Drinking Water RO System

 

Reverse osmosis technology is to apply a pressure greater than osmotic pressure to the solution, so that water is separated from the solution through a special semi-permeable membrane. Because this process is the opposite of osmosis, it is called reverse osmosis.

Drinking Water RO System Components

1. Preprocessing
2. Reverse osmosis
3. Post-processing
4. Cleaning
5. Electrical control
 

Characteristics of RO Water Treatment System

 

Compared with other water treatment methods, it has the advantages of no phase change, normal temperature operation, simple equipment, high efficiency, less occupation, convenient operation, less energy consumption, wide range of adaptation, high degree of automation and good effluent quality. Reverse osmosis desalination rate and purity of produced water are higher than electrodialysis, for high fluoride and low salinity brackish water desalination by reverse osmosis, effluent water quality can reach our daily drinking purified water health standards. And reverse osmosis desalination brackish water energy consumption - - electricity consumption, water consumption are lower than electrodialysis, and reverse osmosis equipment compact structure, small footprint, stable and reliable operation effect, in line with the "clean production" requirements, reverse osmosis is more reasonable than other methods, effective desalination brackish water method.

 

Ro water treatment system method is used to desalinate brackish water with different salt content. The desalting rate of the system is above 96 %, and the quality of desalted water reaches the standard of drinking water. The brackish water desalination device of reverse osmosis system has strong adaptability. It can realize continuous treatment of brackish water with different salt content by adjusting operation parameters according to the quality of raw water. The device is highly integrated and is expected to become a complete set of finalized equipment.

 

Technical Parameters of RO Water Treatment System
 

Model	JFRO-500L
Host Size	800x600x1600mm (can be customized)
Power	1.5KW
Power Supply	220V /380V/460V - 50Hz/60Hz,220V 50Hz can be customized
Operating Pressure	0.8-1.2MPa
Recovery Rate	50%
Designed Water Inlet	1000L/h
Outlet Flow	500L/h
Desalination Rate	≥99.5%
RO Frame	SUS304
Membrane Size	4040
Membrane Elements	DOW /Hydranautics/Troy/ Vontron (Optional)
Number of Membranes	2
Raw Water Pump	CNP/NYP/(Optional)
Raw Water Pump	CNP/NYP(Optional)
Tank Material	SS/FRP (Optional)
Control Valve	Manual/Automatic
Control Valve Brand	FLECK/RUNXIN
Membrane Housing	SS/FRP (Optional)
Pipe Material	U-PVC, Stainless steel (Optional)

 

Introduction of RO Water Treatment System Consumables

 

1. Original water pump: to provide pressure to quartz sand filter/activated carbon filter/water softener;

2. Quartz sand filter: glass fiber as the shell, filled with quartz sand, can filter large particle impurities, suspended matter, colloid, etc.. It is important to remove sediment; (Optional shell and stainless steel, carbon steel)

Activated carbon filter: glass fiber as shell, filled with activated carbon, remove color, odor, residual chlorine and organic matter; (Optional shell and stainless steel, carbon steel)

4. Safety filter: prevent large particles, bacteria and viruses from entering RO film, accuracy is 5μm;

5. Reverse osmosis system: can remove particles, colloid, organic impurities, heavy metal ions, bacteria, virus, heat source, etc. Hazardous substances and 99% dissolved salt;

6. High pressure pump: provide high pressure to reverse osmosis membrane;

7. Polypropylene filter cartridge: interception of large particles, bacteria and viruses with accuracy greater than 5μm. (Optional);

8. Folding filter cartridge: intercept large particles, bacteria and viruses with accuracy > 0.22μm. (optional).

Types of Drinking Water RO System

1. Cellulose acetate RO membrane. Cellulose acetate is also called acetyl cellulose or cellulose acetate. Cellulose-containing cotton, wood, etc. are often used as raw materials, and are made into cellulose acetate through esterification and hydrolysis, and then processed into reverse osmosis membranes.
2. Composite RO membrane. The characteristic of the composite RO membrane is that it is mainly made of the above two materials, which is composed of a thin dense layer and a porous support layer. The porous support layer, also known as the base film, plays the role of enhancing the mechanical strength. The dense layer is also called the epidermis layer, which plays the role of desalination, so it is also called the desalination layer. The thickness of the desalination layer is generally 50nm, and the thinnest is 30nm.
3. Polyamide RO membrane. Polyamides include aliphatic polyamides and aromatic polyamides. The main applications in the 1970s were aliphatic polyamides such as nylon-4, nylon-6 and nylon-66 membranes.
 

Process flow of RO water treatment system:

Composition of RO Water Treatment System

 

Reverse osmosis purified water treatment system generally includes pretreatment system, reverse osmosis device, post-treatment system, cleaning system and electrical control system.

 

1, the pretreatment system generally includes the original water pump, dosing device, quartz sand filter, activated carbon filter, precision filter, etc. Its main function is to reduce the pollution index of raw water and other impurities such as residual chlorine to meet the requirements of reverse osmosis inlet water.

2. Reverse osmosis device mainly consists of multistage high pressure pump, reverse osmosis membrane element, membrane shell (pressure vessel), bracket and so on. Its main function is to remove impurities in water, so that the water meets the requirements of use.

3. Post-treatment system is an additional configuration in the case that reverse osmosis cannot meet the requirements of outlet water. Mainly including negative bed, positive bed, mixed bed, sterilization, ultrafiltration and other one or more of the equipment.

4, cleaning system is mainly composed of cleaning water tank, cleaning water pump, precision filter. When the reverse osmosis system is polluted and the effluent index cannot meet the requirements, it is necessary to clean the reverse osmosis system to restore its efficacy.

5. Electrical control system is used to control the normal operation of the whole reverse osmosis system. Including instrument panel, control panel, all kinds of electrical protection, electrical control cabinet, etc.