| Customization: | Available |
|---|---|
| Certification: | ISO9001, CE |
| Salt Rejection Rate: | 99.5% |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Advantages of Drinking Water RO System
Total Dissolved Solids Reduction: Reverse osmosis is a rare water treatment process that reduces total dissolved solids. The few other treatment methods with this capability are generally not as effective as reverse osmosis.
Cost-effectiveness: Reverse osmosis is popular in industrial settings because it is very economical compared to alternative filtration methods. It can handle large volumes of water while maintaining efficiency within a given budget.
Environmentally friendly: Compared to other treatment methods, reverse osmosis is also relatively environmentally friendly. It uses less energy than other methods such as thermal distillation because it does not rely on energy production. Using reverse osmosis can help facilities reduce carbon emissions, protect the environment and do their part to curb climate change.
Removes alkalinity and hardness: Reverse osmosis removes calcium and magnesium ions, which cause hard water, and carbonate ions, which cause unwanted alkalinity
Flow chart of Ro Water Treatment System
Source water tank → source water booster pump → multi-media filter → activated carbon filter → cation resin softener → precision filter → primary RO reverse osmosis pure water system → secondary RO reverse osmosis pure water system → water gas mixer →Ozone sterilizer→Stainless steel pure water tank→Automatic filling line
|
Model |
JFRO-1000L |
|
Host Size |
1000x600x1600mm (can be customized) |
|
Power |
2.2KW |
|
Power Supply |
220V /380V/460V - 50Hz/60Hz,220V 50Hz can be customized |
|
Operating Pressure |
0.8-1.2MPa |
|
Recovery Rate |
50% |
|
Designed Water Inlet |
2000L/h |
|
Outlet Flow |
1000L/h |
|
Desalination Rate |
≥99.5% |
|
RO Frame |
SUS304 |
|
Membrane Size |
4040 |
|
Membrane Elements |
DOW /Hydranautics/Troy/ Vontron (Optional) |
|
Number of Membranes |
4 |
|
Raw Water Pump |
CNP/NYP/(Optional) |
|
High Pressure Pump |
CNP/NYP/(Optional) |
|
Tank Material |
SS/FRP(Optional) |
|
Control Valve |
Manual/Automatic |
|
Control Valve Brand |
FLECK/RUNXIN |
|
Membrane Housing |
SS/FRP |
|
Pipe Material |
U-PVC/ Stainless steel (Optional) |
Reverse osmosis water treatment system has poor filtration effect:
There are many reasons for the poor filtering effect, such as: the selection of filter material variety, filling amount is unreasonable, filter cycle backwash scrubbing time control is unreasonable, will lead to high SDI.
Low removal rate of organic matter
1. Improve the pretreatment process and improve the measures of COD reduction in the system
2. Try to replace other non-oxidizing fungicides for COD removal.
3. Replace or regenerate when the COD adsorption of the filter material of activated carbon filter is full.
Manufacturing, installation and commissioning of reverse osmosis water treatment equipment:
Users should monitor the whole process quality and process of manufacturing process equipment according to the design requirements, and grasp the quality assurance of selected materials and components.
In the process of equipment installation, the installation position and physical and chemical indexes of instruments and filling materials (filter media, resin, hollow balls, etc.) are strictly located and inspected.
In the debugging process, the additives and consumables used in the operation process should be tested qualitatively and quantitatively. Special attention should be paid to the compatibility of PAC, PAM, scale inhibitor, etc., and the suitable operating consumables for the system should be selected through tests.
){kind=link}